Table des Matières
Publicité
TO MOVE:
1. Stand at the Tower end of the Allegro. Grasp the Allegro
frame firmly with two hands. Be sure to lift with your hands on
the Allegro frame, not on the Tower frame.
2. Lift the frame to waist level.
3. Roll the Allegro to the desired location using the transport
wheels at the foot-end of the frame.
Note: Raising the Allegro Tower to a more vertical position
increases its maneuverability. Please exercise caution when lifting
the frame above waist height. Use two people if possible.
TO STAND:
Note: It is absolutely critical that the Allegro footbar be set and
locked in the correct position for standing storage. If possible,
use two people when standing an Allegro on end.
1. Move and lock the footbar into the holes closest to the foot
end of the frame. This is the position furthest from the
carriage. Be sure that the footbar plunger pins securely lock
into the frame holes.
2. Raise the footbar to its highest position. Be sure that the
footbar lever pins drop securely into the highest holes on the
trunnion plate.
3. Attach all springs to spring bar.
4. Check for overhead
clearance. An Allegro
requires approximately
93 inches of vertical
clearance.
5. Lower the Tower frame
onto the carriage (see
instructions for folding
Tower).
6. Lift the head end of the
Allegro frame to waist
height. Use your foot to
steady the wheeled end
of the frame as you lift
to vertical. Do not lift the
Allegro by holding the
Tower frame.
See Figure L.
For additional safety, Balanced Body offers a Vertical Storage
Strap, which fastens the Allegro Tower to a wall.
18
Fig L
If you have any questions about installation and assembly, please
call Balanced Body.
1-800-PILATES in the US and Canada or +1-916-388-2838
(international).
Publicité
Table des Matières
