Unpacking - Tecno-gaz Europa B xp Mode D'emploi

6 - UNPACKING

The autoclave is shipped in a suitable package to be transported and moved easily and to protect its contents.
The package must not be jostled, it must be moved with care avoiding letting it turn over or fall from a height
superior to 15 cm.
In case autonomous handling means are not available handle the packaged autoclave always in two persons.
The autoclave is supported on a wood pallet and closed in a corrugated reinforced carton, inserted from above
by machine.
The autoclave is fixed with two plastic bands to the pallet.
To unpack the autoclave, cut the two bands, then remove the carton covering it with a vertical movement.
The autoclave will be resting on the pallet, lift it always in two persons, picking it up at the base and positioning
it on the prepared surface or in the room.
IMPORTANT
Do not lift the autoclave from the inferior part of the door or command panel, this incorrect operation
can create problems of a mechanical nature.
Inside the package you will find:
USER'S MANUAL to be read with attention and kept in a place available to all operators assigned to
sterilization.
CERTIFICATION which must be conserved
GUARANTEE LABEL which must be completed and sent to TECNO GAZ SPA.
ATTENTION
ALWAYS CONSERVE ORIGINAL PACKAGING
49 DXBA408 Rev_14