Initial Operation With Setting Switch - Selve SEE Notice

Initial operation

4.2. Initial operation with setting switch

When connecting the setting switch, consider the following:
Caution! Risk of injury through an electric shock!
Connection only when de-energised
Warning!
The 4 wires in the setting switch cable must be connected to the motor wiring cable
according to their colours.
Rotation left = brown
Rotation right = black
N = blue
PE = yellow-green
SELVE setting switch (item no. 290103)
LED indicates connection in correct phase sequence
Pushbutton E is the setting pushbutton
Pushbutton for moving the motor up and down
25
GB
GB