Electric Connection; Setting Of The End Positions - Selve SP 2/15 Notice D'emploi

EN Installation and electrical connection

3.4. Electric connection

4. Setting of the end positions

When connecting the setting switch for motors, consider the following:
Caution! Risk of injury through an electric shock!
Connection only when de­energised!
Warning!
The 4 wires in the setting switch cable (item no. 290101) must be connected to the
motor wiring cable according to their colours.
1 = PE, yellow­green
2 = DOWN, black
3 = UP , brown
4 = N, blue
Depending on the installation position, the connections
for the running direction may have to be exchanged.
Motors of type SP must not be connected in
parallel.
PE = yellow­green
N = blue
UP = brown
DOWN = black
18