Setting Of The End Positions With Setting Switch/Switch; Selection Table For Settings - Selve SE Pro Serie Notice De Réglage

Setting of the end positions

4.4. Setting of the end positions with setting switch/switch

When connecting the setting switch for motors, consider the following:
Caution! Risk of injury through an electric shock!
Connection only when de­energised!
Warning!
The 4 wires in the setting switch cable must be connected to the motor wiring cable
according to their colours.
SELVE setting switch
article no. 290103
Note: The following settings can be made with both the SELVE setting switch (article
no. 290103) and the new SELVE universal setting switch (article no. 291009).

4.5. Selection table for settings:

Setup-mode/end positions in operation
Automatic setup­mode
bottom position, top stop/release
Manual setup­mode
bottom position, top position
Manual setup­mode
bottom position, top stop/release
SELVE universal setting switch
article no. 291009
UP = brown
DOWN = black
N = blue
PE = yellow/green
Control Up/Down
E button
Setting switch
4.5.1. (page 30)
4.5.2. (page 31)
4.5.3. (page 32)
29
EN
Switch
4.5.1. (page 30)
–
–
EN