Unbalance Visualisation In Grammes/Ounces; Rounding-Off - Corghi EM 9550 Plus Laserline Manuel D'utilisation

UNBALANCE
VISUALISATION IN
GRAMMES/OUNCES
Perform the following procedure to set the visuali-
sation of the unbalance values in grams or ounces:
- Press the button to access the pro-
gramme menu.
- Use the
cursor.
- Select the programme icon.
- Press the button to change the setting.
- Press the button to confirm selection
and exit the programme menu.

ROUNDING-OFF

When started up, the machine is set to display
the unbalance values at five-gramme increments,
i.e. rounded to the nearest multiple of five (or
quarters of an ounce if visualised in ounces).
Under this condition, the first four grams of unbal-
ance are not displayed since a suitable threshold,
indicated on the LCD display in the status line,
is activated .
This setting can be changed from grx5 to grx1 (from
oz/4 to oz/10) either permanently or temporarily.
Rounding off permanently
Perform the following procedure to change the
EM 9550 Plus - EM 9550 C Plus - Operator's manual
20
buttons to move the
unbalance value visualisation from grx5 to grx1
(from oz/4 to oz/10) or vice-versa:
- Press the button to access the pro-
gramme menu.
- Use the
cursor.
- Select the programme icon.
- Press the button to change the setting;
the threshold is eliminated and the
icon is indicated on the status line on the LCD
display.
- Press the button to confirm selection
and exit the programme menu.
Rounding off temporarily
Perform the following procedure to display the
unbalance values from grx5 to grx1 (from oz/4 to
oz/10) temporarily:
- keep the button pressed in all bal-
ancing environments except for ALUP.
Warning:
if the unbalance visualisation is in grX1, the
button is not active.
buttons to move the
57
UK