Unbalance Visualisation In Grammes/Ounces; Rounding-Off - Corghi ProLine 650 Manuel D'utilisation

- Values set previously can be increased or
decreased quickly by keeping the keys
pressed.
- Press the
previous value and set the machine for
diameter data entry.
- Read the rated rim diameter value on the
tyre.
- Modify the displayed diameter value by
pressing the
the read number is set. Press the button
to set the diameter in millimetres or to
convert a parameter already entered in
inches into millimetres
- Press the
previous value and set the machine for
distance data entry.
- bring the distance measuring arm into
contact with the inner side of the rim
(Fig.10).
- Read the wheel/body distance on the
rule.
- Modify the displayed distance value by
58
button to confirm the
buttons until
.
button to confirm the
10a
pressing the
the read number is set.
- On completion, press
the unbalance values recalculated on the
basis of the new dimensions, or
to perform a wheel spin.
UNbALANCE
VISUALISATION IN
GRAMMES/OUNCES
The setting for the visualisation of the
unbalance values in grammes or ounces is
made by keeping the key
for about five seconds.

ROUNDING-OFF

When started up, the machine is set to dis-
play the unbalance values at five-gramme
increments, i.e. rounded to the nearest
multiple of five (or quarters of an ounce if
visualised in ounces).
In this condition, the first four grams of
unbalance are not displayed since an ap-
propriate threshold, indicated by illumi-
nation of the
panel, is activated.
The key can be pressed to
eliminate the threshold (the illuminated
indication "x5"; "oz/4" goes out) and the
unbalance values will be displayed gram
User manual ProLine 650
buttons until
to display
pressed
LED on the display