Instantaneous water heater for Regudis W-HTE
Mounting
3.4
Installation scheme
1
9
Illust. 2:
Installation scheme
1
Hot water outlet Regudis W-HTE
2
Cabinet
3
Flow sensor
4
Regudis W-HTE
5
Ball valve connection set for Regudis
W-HTE
6
Heating circuit supply
7
Heating circuit return
8
Multidis SF heating circuit distributor/
collector
9
Instantaneous water heater
3.5
Technical data
Please note the separately enclosed
documents.
18
2
3
4
5
6
7
8
4. Mounting
Mounting the instantaneous water heater in
Oventrop cabinets is described in these
operating instructions.
•
The instantaneous water heater is
suitable for wall mounting and for
integrated mounting in Oventrop
cabinets (OV item no. 1344599 and
1344699).
•
For wall mounting, please observe the
enclosed "Assembly instructions for
qualifi ed tradespeople".
WARNING
Danger to life due to electric current
Danger to life due to contact with live
components.
f
Completely disconnect the product from
the power supply.
f
Check that no voltage is present.
f
Secure the product against switching
back on.
f
Only install the product in dry indoor
areas.
CAUTION
Risk of scalding due to hot fl uids
If the station was in operation, there is a risk
of scalding due to the unintentional
discharge of hot water or steam.
f
Allow the system to cool down.
f
Wear suitable protective clothing.
CAUTION
Risk of burns due to hot components
Any unprotected contact with hot
components may lead to burns.
f
Allow the system to cool down.
f
Wear safety gloves.
134456180-V01.03.2021