Ball valve connector block
6.
Installation
The ball valves are mounted onto the fixing
plate.
6.1
Installation into a cabinet
1. Fix the fixing plate on the rear wall of the cabinet.
Fixing material is supplied with the Oventrop
cabinet.
Illustr. 5: Installation into a cabinet
6.2
Wall attachment
Observe the dimensions of the dwelling station
"Regudis W-HTE" and of the surface-mounted
cover when selecting the installation location.
135
Illustr. 6: Dimension with dwelling station "Regudis
W-HTE" in mm
134448080-V03.02.2019
600
Illustr. 7: Dimensions with surface-mounted bonnet in
mm
1. Fix the fixing plate to the wall with the help of
suitable fixing material.
Installation
44
19