Safety Notes; Danger Caused By Inadequately Qualified Personnel; Danger To Life Due To Electric Current; Risk Of Burns Due To An Inadvertent Discharge Of Hot Fluids - oventrop W-HTE Notice D'utilisation

Chauffe-eau instantané pour regudis
Masquer les pouces Voir aussi pour W-HTE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instantaneous water heater for Regudis W-HTE
Safety-related information
DANGER
Indicates an imminent danger with high
risk. The situation will lead to death or
serious injury if not avoided.
WARNING
Indicates a possible danger with moderate
risk. The situation may lead to death or
serious injury if not avoided.
CAUTION
Indicates a possible danger with lower risk.
The situation will lead to minor and
reversible injury if not avoided.
NOTICE
Indicates a situation that may lead to
damage to property if not avoided.
2.3

Safety notes

We have developed this product in accordance
with current safety requirements.
Please observe the following notes concerning
safe use.
2.3.1
Danger caused by inadequately
qualifi ed personnel
Any work on this product must only be carried
out by qualifi ed tradespeople.
As a result of their professional training and
experience as well as their knowledge of the
relevant legal regulations, qualifi ed
tradespeople are able to carry out any work on
the described product professionally.
134456180-V01.03.2021
User
The user must be instructed in the operation
of the product by qualifi ed tradespeople.
2.3.2

Danger to life due to electric current

f
Make sure that the product can be
disconnected from the power supply at
any time.
f
Do not operate the product if it is visibly
damaged.
When working on the product
f
Completely disconnect all components
from the power supply and protect them
against switching back on.
f
Check that no voltage is present.
2.3.3
Risk of burns due to an inadvertent
discharge of hot fl uids
f
Only carry out work when the system is
depressurised.
f
Allow the product to cool down before
working on it.
f
Check that the product is not leaking after
work is complete.
f
Wear safety goggles.
2.3.4
Risk of burns due to hot components
and surfaces
f
Allow the product to cool down before
working on it.
f
Wear suitable protective clothing to avoid
unprotected contact with hot system
components and fi ttings.
2.3.5
Risk of injury due to the weight of the
product
f
Always wear safety shoes during
installation.
EN
15

Publicité

Table des Matières
loading

Table des Matières