Menu Structure - Helios EUR EC Instructions D'installation Et D'utilisation

Installation and Operating Specification EUR EC
8.4

Menu structure

Selection of the menu group (e.g. Base setup) with the arrow keys ▼ + ▲.
You can go to the menu items in the menu groups (e.g. mode of operation) by using the P key. Use
the arrow keys to move up and down within the menu group.
The menu groups consist of one area for the user (user menu) and one area for installation (service).
The service area can be protected against unauthorized access by using a PIN.
In order to simplify the initial start-up operation, the service level is enabled at first (i.e., not protected
by the PIN 0010 (see Operating Instructions / Controller Setup, PIN protection = OFF). If PIN
protection is activated (ON), the service menu remains enabled after input of PIN 0010 as long as one
is pressing keys. If no keys are pressed for ca. 15 minutes, the PIN is automatically erased, i.e. the
service level is blocked.
To make adjustments, press the P key after selecting the menu item. If the previously set value starts
to flash, it can be adjusted with the ▼ + ▲ keys and then saved with the P key. To exit the menu
without making any changes, use the "Esc" short-key, i.e., the originally set values remain.
Information
After installation of the device has been carried out, PIN protection should be activated (see Operating
Instructions / Controller Setup)!
L-BAL-E274-GB 1914 Index 003 Part.-No.
23/117
Controls and Menu