Fronius Primo 3.0-1 Instructions De Service page 18

4
5
The Setup wizard start page is displayed.
The technician wizard is intended for the installer and contains standard-specific
settings. Running the technician wizard is optional.
If the technician wizard is run, it is vital to note the service password that is is-
sued. This service password is necessary for setting the "DNO Editor" menu item.
If the technician wizard is not run, no specifications regarding power reduction
are set.
18
Download the Fronius Solar.web
LIVE or Solar Web Pro app
Run the Fronius Solar.web app
Connect the end device to the
4
WLAN access point
SSID = FRONIUS_240.xxxxx (5-8
digits)
- Search for a network with the
name "FRONIUS_240.xxxxx"
- Establish a connection to this
network
- Enter the password 12345678
(Alternatively, connect the end
device and inverter using an Eth-
ernet cable.)
Enter the following in the
5
browser:
http://datamanager
or
192.168.250.181 (IP address for
WLAN connection)
or
169.254.0.180 (IP address for
LAN connection)