Fronius Primo 3.0-1 Instructions De Service page 10

Symbols on the rating plate:
Text of the warning notices:
WARNING!
An electric shock can be fatal. Before opening the device, it must be disconnec-
ted at the input and output. Wait for the capacitors to discharge (5 minutes).
Notes regarding A dummy device is not suitable for connecting operationally to a photovoltaic
dummy devices
system, and must only ever be used for demonstration purposes.
IMPORTANT! Never connect DC cables to the DC connection sockets on a
dummy device.
The connection of de-energised cables or sections of cable for demonstration
purposes is permissible.
A dummy device can be recognised by its device rating plate:
10
CE mark – confirms compliance with applicable EU directives and
regulations.
WEEE mark – waste electrical and electronic equipment must be
collected separately and recycled in an environmentally sound manner
in accordance with the European Directive and national law.
RCM mark – tested in accordance with the requirements of Australia
and New Zealand.
CMIM mark – tested in accordance with IMANOR requirements for
import regulations and compliance with Moroccan standards.
Safety symbols:
Danger of serious injury and
damage due to incorrect op-
eration
Do not use the functions de-
scribed here until you have
fully read and understood the
following documents:
- These Operating Instruc-
tions
- All the Operating In-
structions for the system
components of the
photovoltaic system, es-
pecially the safety rules
Dangerous electrical voltage
Wait for the capacitors to dis-
charge.