Setup Menu Item; Initial Setting; Setup; Navigating The Setup Menu Item - Fronius Primo 3.0-1 Instructions De Service

SETUP menu item

Initial setting

The inverter is pre-configured after commissioning has been completely carried
out (e.g. using the Installation Wizard) according to the country setup.
The SETUP menu item allows the initial settings of the inverter to be changed
easily to bring it in line, as closely as possible, with the preferences and require-
ments of the user.

SETUP

G R A P H
NOTE!
As a result of software updates, you may find that your device has certain func-
tions that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your
device, but these controls function in exactly the same way.
Navigating the
Entering the SETUP menu item
SETUP menu
item
G R A P H
Menu level, "SETUP" selected
R e l a y
"Standby" entry
Scrolling between the entries
SETUP
(Setup menu)
At the menu level, use the "Left" or
1
"Right" keys to select the "SETUP"
menu item
Press the "Enter"
2
The first entry under the SETUP menu item
is displayed:
"Standby"
key
25