Fronius Primo Dummy; Explanation Of Footnotes; Integrated Dc Disconnector - Fronius Primo 3.0-1 Instructions De Service

Fronius Primo
Weight
Permitted ambient temperature
Permissible humidity
EMC emission class
DC / AC overvoltage category
Inverter topology
Voltage classification
Decisive Voltage Classification
(DVC rating)
Protection devices
DC isolation measurement
Manifestation of DC overload
DC disconnector
Active anti-islanding method
Fronius Primo
Nominal grid voltage
dummy
Mains voltage tolerance
Nominal frequency
Protection class
Dimensions h x w x d
Weight
Explanation of
1)
footnotes
2)
3)
4)
5)
Integrated DC
disconnector
AC
DC
Data
The values quoted are default values; the inverter is configured specific-
ally to meet the needs of the country in question.
Depending on the country setup or device-specific settings
(ind. = inductive; cap. = capacitive)
Maximum current from a defective PV module to all other PV modules.
From the inverter itself to the PV side of the inverter, it is 0 A.
Guaranteed by the electrical configuration of the inverter
Current peak when switching on the inverter
5.0-1 SC
21.6 kg
-40 °C – +55 °C
0 - 100%
B
2/3
Non-insulated transformerless
DVC-C
DVC-C
DVC-A
2)
Warning/shutdown at R
Operating point shift, power limiter
Integrated
Frequency conversion method
< 1 MOHM
ISO
1 ~ NPE 230 V
1)
+10 / -5 %
1)
50 - 60 Hz
IP 65
645 x 431 x 204 mm
16.75 kg
53