The Menu Level; Activating Display Backlighting; Open Menu Level - Fronius Primo 3.0-1 Instructions De Service

The menu level

Activating dis-
1
play backlighting
Automatic deac- If two minutes pass without any button being pressed, the display backlighting
tivation of dis- switches off automatically and the inverter goes to the "NOW" menu item (as-
play backlight-
suming the display backlighting is set to AUTO).
ing / changing to
the "NOW" menu The automatic selection of the "NOW" menu item can happen from any position
item
on the menu level, unless the inverter was manually switched into the "Standby"
operating mode.
After automatically selecting the "NOW" menu item, the current power of feed-
ing in is displayed.

Open menu level

22
Press any key
The display backlighting is activated.
There is an option under "Display Settings - Backlighting" in the SETUP menu
to set the display backlighting so that it is on all the time or off all the time.
Press the "Menu"
1
The display switches to the menu level.
Using the "Left" or "Right" keys
2
lect the desired menu item
Press the "Enter" key
3
desired menu item
key
se-
to select the