Use Of The Control Panel; Operating Parameters; Changing The Power; Changing The Ventilation - Palazzetti STUFE A LEGNA Mode D'emploi

8.2

Use of the control panel

• By acting on the arrow keys
• The pressure of the keys
8.3

Operating parameters

The operation of the appliance is determined by the of Power and Ventilation parameters set by the user.
8.3.1

Changing the power

The power defines the quantity of combustion air and therefore has a direct impact on consumption.
To change the power:
a) Navigate with the keys
b) Change the value using buttons
8.3.2

Changing the ventilation

To change the value of the ventilation:
a) Navigate with the keys
b) Change the value using buttons
• "Off" = fan off
• "1" minimum, ... , "5" maximum
• "Auto" = automatic operation (the appliance will set the speed as a function of the temperature of the combustion
chamber
• "High" = ultra fast operation (to be used only if it is necessary to quickly heat an environment)
8.4

Mode of operation of the control panel

The control panel is supplied with Access Point configuration (AP Mode). In this mode it is possible to connect to the panel
using the App (refer to the relevant manual) to control the device from your smartphone.
it is possible to move between the various menu
allow to set the parameters with the desired values.
(Power)
on the menu "Power"
(1 minimum,...,5 maximum)
(Fan)
on the menu "Ventilation"
004777430 - 18/04/2019 - PALAZZETTI - PN - Italy
27