Use Of The Control Panel; Operating Parameters; Changing The Power; Changing The Ventilation - Palazzetti ECOMONOBLOCCO WT F Série Notice D'utilisation Et D'entretien

20.2 Use of the control panel

• By acting on the arrow keys
• The pressure of the keys

20.3 Operating parameters

The operation of the appliance is determined by the of Power and Ventilation parameters set by the user.

20.3.1 Changing the power

The power defines the quantity of combustion air and therefore has a direct impact on consumption.
To change the power:
a) Navigate with the keys
b) Change the value using buttons

20.3.2 Changing the ventilation

To change the value of the ventilation:
a) Navigate with the keys
b) Change the value using buttons
• "Off" = fan off
• "1" minimum, ... , "5" maximum
• "Auto" = automatic operation (the appliance will set the speed as a function of the temperature of the combustion
chamber
• "High" = ultra fast operation (to be used only if it is necessary to quickly heat an environment)
20.3.3 Opening / closing the door
To open / close the door:
a) Navigate with the keys
b) Press the key
c) Press the key

20.4 Mode of operation of the control panel

The control panel is supplied with Access Point configuration (AP Mode). In this mode it is possible to connect to the panel
using the App (refer to the relevant manual) to control the device from your smartphone.
cod. 004777530 MBL - 21/03/2019 - Palazzetti - PN - Italy
it is possible to move between the various menu
allow to set the parameters with the desired values.
on the menu "Power"
(1 minimum,...,5 maximum)
on the menu "Ventilation"
on the menu "Door"
to open the door
to close the door
(Power)
(Fan)
(Door)
33