Using The Control Panel - Palazzetti MULTIFIRE ARIA Notice D'installation

7.1.2 Description of the menus
ICON FUNCTION
Power
Fan
*(where featured)
Temperature
Fuel
Timer
ICON FUNCTION
Setup
[3 0] [4 0]
Submenus and
7.2

USING THE CONTROL PANEL

The arrow buttons
When selecting a given function, simply press the
buttons.
Pressing the
The "cancel" button
or error codes.
46/144
USE AND & MAINTENANCE
Stove output setting
It allows you to set the fan speed.
Displays the room temperature reading and is used to set the desired
temperature.
[FULL]
pellet hopper , or deactivates the warning
Enables or disables the timer. When enabled, the icon
SUBMENU
Assigns the programs (max 3) to the different days of the
[ 1 ]
Weekly timer
week
[ 2 ]
Programs Program setting menu
[ 3 ]
Time / date Time and date setting
Displays the number of hours remaining until recommended
[ 4 ]
Hours remaining maintenance. When "Hi" is displayed, the remaining time
exceeds 999 hours.
System
[ 5 ]
Displays the current software version
information
[ 6 ]
Function not enabled
Enables or disables Eco Mode, in which the stove
[ 7 ]
Eco function automatically switches off and on based on room temperature
Difference in degrees from room temperature below which
[ 8 ]
Restart delta
Frost protection
Minimum temperature below which the stove switches on
[ 9 ]
temperature
[ 1 0 ]
Lock keypad Disables the buttons on the keypad
[ 1 1 ]
Display brightness Sets display brightness
[ 1 2 ]
Display mode Sets how the data is displayed
[ 1 3 ]
Buzzer volume Sets the buzzer volume
[ 1 4 ]
Type of pellets Three different types of pellet can be set
[ 1 5 ]
Function not enabled
[ 3 0 ]
Installer menu Sets/displays the stove configuration
[ 3 1 ]
Loading pellets Manual activation of the pellet loading system
[ 3 2 ]
Brazier riddler Manual activation of the mechanical brazier cleaning system
[ 4 0 ]
Service menu Menu reserved for the service centre
in the Setup menu are password-protected and reserved for service centre personnel.
are used to scroll between the different menus that are highlighted.
is used to cancel any changes; pressing and holding the button displays any active alarm
DESCRIPTION
[OFF]
symbol will be displayed.
DESCRIPTION
button and then modify the values, again using the
buttons.
OFF*,1..5; Auto; Hi
6°C .. 51°C
FULL - OFF
will be
cod. 004771981 - 05/2015 - Palazzetti - PN - Italy
VALUES
1..5
ON - OFF
VALUES
[d1] ... [d7]
[P1] ... [P6]
OFF; Eco
0,5 ... 5,0°C
OFF; 3 ... 20
°C
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
1 ... 3
PWD: "54"
PWD: "54"
PWD: "54"