During Operation - E sky ECUREUIL XL Notice D'emploi

• If batteries are used as a transmitter power supply, make sure that they have sufficient remaining capacity (battery
checker). If the batteries are empty, always replace the complete set, never individual cells only.
• Before each operation, check the settings of the trim slider on the transmitter for the different steering directions and,
if necessary, adjust them.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment is solely down to
you being responsible when dealing with the model.
• Improper operation can cause serious damage to people and property! Therefore, during operation, ensure a sufficient
safety distance to persons, animals and objects.
• Fly your model only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can
cause incorrect responses.
• The motors, the receiver/controller component and the flight battery can heat during operation. Therefore, take a
break of 5 to 10 minutes before re-charging the flight battery or before flying with a possibly available spare flight
battery. The model's drive motors need to be cooled to room temperature before each flight.
• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the flight
battery from the receiver/controller component first or switch the model off. It is only after this that the remote control
may be turned off.
• Never switch off the transmitter during operation before disconnecting the flight battery from the receiver/controller
component.
• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.
40
07/10