Led Messages; Switch Device On/Off - Burkert 0911 Instructions De Service

LED MESSAGES

LED Mode Meaning
on Output active
LED1 blinks Programming level (blinks together with LED2)
LED2 blinks Programming level (blinks together with LED1)
Energy-saving mode (second set-value) has
E.S. on
been activated by the digital input
- Signals an Alarm state
- If you are in the lower programming level
Alarm "Pr2", which can only be accessed using
LED on a password, the lighting up of the Alarm LED
signals that the displayed parameters can
also be accessed in the first level Pr1
(without password).

SWITCH DEVICE ON/OFF

SET-VALUE DISPLAYS
CHANGE THE SET VALUE
Hold the SET button down for at least 4 sec
(only for parameter OnF = yes).
Briefly press the SET button once. The set-value
display appears in the display.
Briefly press the SET button again, or wait 5
seconds in order to display the room temperature.
Hold the SET button down for 2 seconds.
Change the set-value within 10 s with the
buttons.
You can save the new set-value by briefly pressing
the SET button or by waiting 10 seconds.
or
0911 - 5