BUTTON COMBINATIONS
+
Locking and unlocking the keypad
SET1+
Selecting the programming level
SET1+
Return to the room temperature display
LED MESSAGES
LED
Mode
Meaning
on
Output 1 active
on
Output 2 active
LED1
blinks
Programming level (blinks together with LED2)
LED2
blinks
Programming level (blinks together with LED1)
Energy-saving mode (second set-value) has
E.S.
on
been activated by the digital input
- Signals an Alarm state
- If you are in the lower programming level
Alarm
"Pr2", which can only be accessed using
LED
on
a password, the lighting up of the Alarm LED
signals that the displayed parameters can
also be accessed in the first level "Pr1"
(without password).
SWITCH DEVICE ON/OFF
DISPLAYING THE SET VALUE
Hold down the SET1 button for at least 4 seconds
(only for parameter OnF = yes).
Briefly press the SET button once. The set-value
display appears in the display.
Briefly press the SET button again, or wait 5
seconds in order to display the room temperature.
0911 - 5