The oil must be added through the hole in which the oil cap was lodged by using a proper funnel
(ref 5, Fig.21).
5
FIG. 21
TOOLS:
Funn
el
Add oil a little at a time, waiting for the level to rise before each successive addition, until the oil
Disp
level is about ½ cm above the red mark on the indicator (ref 3, Fig.21).
osal
Replace the filling cap (ref 1, Fig.21) and tighten down.
conta
iner
Allen
wren
ch n°
INSTRUCTIONS MANUAL
Refill vacuum pump with new oil
To the center of the control glass
Then replace filling cap.
When done press ENTER to exit.
MAX
MIN
-68-
DD/MM/YY XX:XX PM
ENTER
1
3