Automatic Procedure; Edit Vacuum Data - Mopar ECO NEXT ONE Manuel D'instruction

INSTRUCTIONS MANUAL

AUTOMATIC PROCEDURE

In the automatic mode, all the operations are performed automatically: recovery and recycling,
oil discharge, vacuum, new oil reintegration, and charging. The values for the quantity of gas
recovered, quantity of oil recovered, vacuum time, quantity of oil reintegrated, and quantity of
gas charged into the system are displayed and printed (optional) at the end of each single
operation.
Connect the hoses to the A/C system with the quick-connect couplings bearing in mind that
BLUE must be connected to the low-pressure side and RED to high pressure. If the A/C system
is equipped with a single quick-connect coupling for high or low pressure, connect only the
relative hose.
From the MAIN MENU:
Select the AUTOMATIC PROCEDURE , the following screen is displayed:
DD/MM/YY XX:XX PM
AUTOMATIC
0g
CHARGE AMOUNT
ESC
0ml AUTO
OIL
DATABASE
0g 0g
CHARGE AMOUNT CHARGE AMOUNT
2
VACUUM TIME
ENTER
min

EDIT VACUUM DATA:

Use the KEYPAD to insert the new value of the VACUUM TIME, press ENTER to confirm, ESC
to return back.
NOTE: use the VACUUM SETTING to change the duration of the LEAK CHECK.
-28-