Mopar ECO NEXT ONE Manuel D'instruction page 31

Connect and open the coupling connected to the A/C system, then press ENTER, press ESC to
return back
Open HP and LP valves press ENTER to continue,
The following screen will be displayed reminding you to check if the used oil container is not full.
Press ENTER
During the recovery phase, the machine displays the quantity of refrigerant recovered, in grams.
Upon completion of recovery, the machine will stop and discharge, while automatically
displaying the used oil extracted from the A/C system during the recovery phase.
The oil discharge operation lasts 4 minutes.
INSTRUCTIONS MANUAL
RECOVERY/RECYCLE
Connect and open HP and LP couplings
To A/C system and press ENTER
Open HP and LP valves
Press ENTER to continue
WARNING !
Check that used oil container is not full
Press ENTER to continue
RECOVERY/RECYCLE
Gas recovered:
A/C pressure
Tank Temperature
-31-
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
0g
-0.5 bar
25.2 °C
STOP