Mopar ECO NEXT ONE Manuel D'instruction page 45

Close HP and LP valves and press ENTER.
A summary of the amount gas of the CHARGE phase is displayed.
Press the symbol for printing
OIL INJECTION procedure completed successfully, press ENTER to return to the manual
procedure page.
NOTE: near the end of the charge could be displayed the following alarm message:
The SLOW CHARGE alarm occurs when the tank pressure and the system pressure equalize
(due to low pressure, excessive system temperatures, etc.). Check connections then press
ENTER to continue, or press ESC to exit.
INSTRUCTIONS MANUAL
CHARGE
Close HP and LP valves
END of procedure
Gas charged:
Press ENTER to continue
SLOW CHARGE
Check connections
Press ENTER to continue
Press ESC to exit
-45-
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
200 g
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER