Preliminary Operations - Mopar ECO NEXT ONE Manuel D'instruction

PRELIMINARY OPERATIONS

Check that the main switch (ref.1, Fig.14) is set to O. Connect the machine to the electrical
supply and switch on.
FIG.14
1 The user can verify the all data of the machine:
o Check that the OIL containers aren't empty, if necessary operate the substitution
as described in ORDINARY MAINTENANCE section.
o Check that the oil level in the used oil container is < 200 cc, if necessary empty it
as described in ORDINARY MAINTENANCE section.
o Check on the machine display that there are at roughly 2 kg of refrigerant in the
tank. Should this not be the case, fill the on-board machine tank from an external
tank of appropriate refrigerant following the procedure described in the TANK
FILLING (ORDINARY MAINTENANCE)
Check that the vacuum pump oil level indicator (ref.3, Fig.15) shows at least one-half full. If
the level is lower, add oil as explained in the MAINTENANCE section.
INSTRUCTIONS MANUAL
FIG. 15
TOOLS:
 Funn
el
 Disp
osal
cont
MAX
ainer
 Alle
MIN
n
wren
ch n°
3
5; 8.
-26-
1