Charge (For Eco Next One And Eco Next One Hybrid ); Start Procedure - Mopar ECO NEXT ONE Manuel D'instruction

(for ECO NEXT ONE and ECO NEXT ONE HYBRID)
CHARGE
From the MANUAL PROCEDURE, select CHARGE, the following screen will be displayed:
NOTE: For most systems the quantity of fluid to be refilled is indicated on a plate that is in the
vehicle's engine compartment. If this quantity is not known, look for it in the relevant manuals.
Select the CHARGE AMOUNT quantity field,
amount (in grams) of REFRIGERANT that will be loaded into the A / C system.
NOTE: If DATABASE is installed, can be used to insert the value of refrigerant into the GAS
FILLING field.
NOTE: if gas filling is lower than 100 grams the following popup warning will be displayed:
Gas charge lower than 100 grams is not allowed, press ENTER then digit an higher amount of
gas filling.

START PROCEDURE

NOTE: the STOP button
charge the procedure hasn't to be paused or stopped to avoid to compromise the precision of
the procedure.
After selected all the procedure data, press ENTER to continue, the following screen will be
displayed:
INSTRUCTIONS MANUAL
CHARGE
CHARGE AMOUNT
0 ml
CHARGE AMOUNT
(min 100g)
_
[grams]
Charge amount
Less than 100g/4oz
or unavailable quantity requested
Press ENTER to continue
literally pause the running procedure. In the final phase of the
STOP
-46-
DD/MM/YY XX:XX PM
ESC
0g
0g
CHARGE AMOUNT
ENTER
see the keypad on the display to enter the
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ENTER