Mopar ECO NEXT ONE Manuel D'instruction page 37

Open HP and LP valves press ENTER to continue
NOTE: if ECO NEXT ONE HFO or with analyzer enabled, the gas analysis will be performed
before recovery
The following screen will be displayed reminding you to check if the used oil container is not full.
The RECOVERY PROCEDURE will start, and the following screen will be displayed:
During the recovery phase, the machine displays the quantity of refrigerant recovered, in grams.
Upon completion of recovery, the machine
displaying the used oil extracted from the A/C system during the recovery phase. The oil
discharge operation lasts 4 minutes
INSTRUCTIONS MANUAL
Open HP and LP valves
Press ENTER to continue
WARNING !
Check that used oil container is not full
Press ENTER to continue
RECOVERY/RECYCLE
Gas recovered:
A/C pressure
Tank Temperature
RECOVERY/RECYCLE
Gas recovered:
A/C pressure
Oil recovered:
Tank Temperature
-37-
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
0g
-0.5 bar
25.2 °C
STOP
DD/MM/YY XX:XX PM
0g
STOP
0.0 bar
0 ml
25.2 °C
will stop and discharge, while automatically