Start Procedure - Mopar ECO NEXT ONE Manuel D'instruction

Gas charge lower than 100 grams is not allowed, press ENTER then digit an higher amount of
gas filling.

START PROCEDURE

NOTE: the STOP button
charge the procedure hasn't to be paused or stopped to avoid to compromise the precision
of the procedure
After selected all the procedure data, press ENTER to continue, the following screen will be
displayed:
Connect and open the coupling connected to the A/C system, then press ENTER, press ESC to
return back.
Open manual valves and press ENTER.
The machine will perform 5 minutes of vacuum:
INSTRUCTIONS MANUAL
Charge amount
Less than 100g/4oz
or unavailable quantity requested
Press ENTER to continue
literally pause the running procedure. In the final phase of the
CHARGE
Connect and open HP and LP couplings
to A/C system and press ENTER
Open HP and LP valves
Press ENTER to continue
VACUUM
1:37 min
VACUUM
A/C pressure
-0.99 bar
-50-
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
STOP