NOTE: For most systems the quantity of fluid to be refilled is indicated on a plate that is in the
vehicle's engine compartment. If this quantity is not known, look for it in the relevant manuals.
Select the CHARGE AMOUNT quantity field,
amount (in grams) of REFRIGERANT that will be loaded into the A / C system.
NOTE: If DATABASE is installed, can be used to insert the value of refrigerant into the GAS
FILLING field.
NOTE: if gas filling is lower than 100 grams the following popup warning will be displayed:
Gas filling lower than 100 grams is not allowed, press ENTER then digit an higher amount of gas
filling.
Select the OIL quantity field,
grams) of OIL that will be loaded into the A / C system.
INSTRUCTIONS MANUAL
OIL INJECTION
0 g
CHARGE AMOUNT
0 ml
OIL
CHARGE AMOUNT
0 g
CHARGE AMOUNT
(min 100g)
_
[grams]
Charge amount
Less than 100g/4oz
Or unavailable quantity requested
Press ENTER to continue
0 ml
see the keypad on the display to enter the amount (in
AUTOMATIC
CHARGE AMOUNT
OIL
-42-
DD/MM/YY XX:XX PM
ESC
DATABASE
0g
ENTER
see the keypad on the display to enter the
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
ESC
0 g
DATABASE
0 ml
0g
CHARGE AMOUNT
ENTER