Güde GMD 400 Traduction Du Mode D'emploi D'origine page 9

GB
Thank you for buying the mini lathe Güde GMD 400 and for your trust in our products.
!!! Please read the operating manual carefully before starting the machine
Any technical questions? Complaints? In need of spare parts or operating manual?
On our web pages www.guede.com we will help you fast and without needless bureaucracy. Please help us so we can help you. To identify
your machine in case of any claim, we need to know serial number, product number and year of production. You can find all these data on the
GB
type label. To have them handy please write them down in here:
Serial number:
Tel.: +49 (0) 79 04 / 700-360
For reprints, even partial, permission required. Technical changes reserved
A.V. 2
Labeling:
Product safety:
Product complies with EU
standards
Restrictions:
Overall restriction (in connection
with other pictogram)
Wearing jewellery prohibited
Do not use when wet
Warning:
Warning/watch out
Orders:
Read the operating manual before
use
Wear safety gloves!
Environmental protection:
Dispose the waste professionally.
.
Do not litter
Malfunctioning and/or disposed
electric or electronic devices must
be disposed to authorized scrap-
.
yards
Package:
This side up
Product number:
Tel.:
Wearing loose attire prohibited!
Long hair prohibited
Do not pull the power cord
Beware of fling away objects!
Wear protective goggles and
ear protection!
Packing material made of
cardboard can be disposed in
.
scrap-yards
+49 (0) 79 04 / 700-360
Technical data:
Weight
Max. workpiece length
Vario gear box
Delivery range (pict.1)
1. 9x exchangeable gearwheels
2. oil bottle
3. chuck jaw
4. jaw chuck key
5. gearwheels for adjustable scale
6. fork wrench
7. alien wrench
8. mini lathe
Machine description (pict. 2)
1. revolution controller
2. selecting switch for revolution direction
3. main switch ON/OFF
4. manual wheel for longitudinal pull
5. longitudinal slides
6. cross slides
7. top slides
8. handle with scale for cross pull
9. scale for lathe-turning of cones
10. feed adjusting lever
11. round scale for feed
12. handle with scale for manual pull
13. leading spindle
14. lathe board
15. manual handle for quill
16. lathe tailstock
17. tailstock adjusting screw
18. clamping lever for quill
19. centre point
20. safety guard
21. clamping handle of tool holder
22. chuck jaw
23. 3-jaw chuck
24. case with exchangeable wheels
25. headstock
Machine
Ideal for lathe-turning and thread cutting from structural steel,
nonferrous metal, plastic and wood, adjustable dovetailed lead,
driving transition using multispeed pulley and exchangeable
gearwheels (sliding spindle), right/left run, electric switching,
automatic feeding device, continuous revolutions regulation.
9
!!!
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Similar pictures
.
Engine power
Max. workpiece height
Max. workpiece diameter
!!