Operation Of The Optional Remote Controls - Enraf Nonius Endomed 581ID Mode D'emploi

1485.801
Remote control for channel 1 and 2, including STOP
key.
1
1 Amplitude control
Control without end position for setting the patient
current. As soon as the remote control is connected
to the Endomed 581 the patient current can only be
set via this.
2 Amplitude control channel 2
The Endomed 581 is a one-channel stimulation appa-
ratus. This control cannot be used with the Endomed
581.
3 STOP-key
Key for patient current cut-off. After pressing this key
the current reduces to zero.
28
2 3

OPERATION OF THE OPTIONAL REMOTE CONTROLS

1485.802
Remote control for channel 1 including keys for S/d curves
2
1 3
1 Amplitude control
Control without end position for setting the patient
current. As soon as the remote control is connected
to the Endomed 581 the patient current can only be
set via this.
2 Pulse key
Key for manual pulse feed during strength/duration
evaluation . One pulse is given every time this
key is pressed. This key can only be used when the
key for S/d curves on the Endomed 581 is switched
on.
3 Parameter control key
Key for setting the value of a selected parameter.
4 Accept key
This key is not used with the Endomed 581. It has a
special function with other equipment.
4