Roland OCTAPAD SPD-20 PRO Manuel Du Propriétaire page 19

KIT EQ settings
Parameter Value
ON/OFF ON, OFF
LoFrq
20Hz–1kHz
LoGain -12–+12dB
MidFrq 20Hz–16kHz
Mid Q 0.5–8.0
MidGain -12–+12dB
HiFrq 1–16kHz
HiGain -12–+12dB
KIT MIDI settings
Parameter Value
0 (C -)–127 (G 9)
Note#
OFF
GateTime 0.1– 8.0s
CH1–CH16
Channel
GLOBAL
HClNote (*)
0 (C -)–127 (G 9), OFF MIDI note number transmitted and received for the closed hi-hat
(Hi-Hat Closed Note)
HPedal (*)
0 (C -)–127 (G 9), OFF MIDI note number transmitted and received for the pedal hi-hat
(Hi-Hat Pedal)
INITIALIZE –
(*) Valid only for the pad that is controlled by hi-hat open/closed (p. 25).
Explanation
Turns the KIT EQ on/off.
Specifies the center frequency of the low-frequency region.
Amount of low-frequency boost/cut
Adjusts the center frequency of the mid-frequency region.
Width of the mid-frequency region
Higher values make the region narrower.
Adjusts the amount of mid-frequency boost/cut.
Specifies the center frequency of the high-frequency region.
Adjusts the amount of high-frequency boost/cut.
Explanation
MIDI note number transmitted/received for each pad
* If you specify a note number that is the same as the note number specified for a different pad,
an "*" is shown at the end.
Note messages are not received or transmitted
Duration of the note that each pad transmits
MIDI channel used by each pad to transmit or receive note messages or control change messages
Transmit/receive using the transmit/receive channel specified in SYSTEM (p. 26)
Returns the KIT MIDI settings to their factory-set state.
Creating a Kit
19