Using A Usb Flash Drive; Saving/Loading Settings - Roland OCTAPAD SPD-20 PRO Manuel Du Propriétaire

Other Functions

Using a USB Flash Drive

If you connect a USB flash drive (sold separately) to the USB MEMORY
port, you can back up all settings (or the settings of an individual kit
that you specify) to the USB flash drive.

Saving/Loading Settings

NOTE
5 Never insert or remove the USB flash drives while this unit is
turned on. Doing so may corrupt the unit's data or the data on the
USB flash drives.
5 Taking care that the connector of the USB flash drive is oriented
correctly, insert it all the way into the port. Do not use excessive
force.
5 Do not strike the pads while data is being saved or loaded. The
vibration might cause an error to occur. While the USB settings
screen is shown, sound is not produced even if you strike a pad.
1. Press the [SYSTEM] button.
2. Use the [K][J] buttons to select "USB MEMORY."
3. Press the [ENTER] button.
The USB MEMORY screen appears.
4. Use the [K][J] buttons to select a function.
Function Explanation
Backs-up all of the OCTAPAD's settings to the
SaveAll
USB flash drive.
Loads previously-saved backup data from the
LoadAll
USB flash drive into the OCTAPAD.
Deletes individual items of previously-saved
DelAll
backup data from the USB flash drive.
Backs-up the settings of the individual
SaveKit
OCTAPAD kit that you specify to the USB flash
drive.
28
Function Explanation
Loads the individual kit that you specify from
LoadKit
the USB flash drive into the OCTAPAD (p. 30).
Deletes backup data of a previously-saved
DelKit
individual kit from the USB flash drive.
Format Formats the USB flash drive.
SaveAll
1. Access the USB MEMORY screen (p. 28).
2. Select "SaveAll," and then press the [ENTER] button.
3. Use the [–][+] buttons to specify the save-
destination, and then press the [ENTER] button.
4. Use the [K][J] buttons and the [–][+] buttons to
specify a name for the backup, and then press the
[ENTER] button.
%[ENTER]
5. Press the [ENTER] button to save the data.
All settings of the OCTAPAD are backed-up to the USB flash drive.
If you decide to cancel, press the [EXIT] button.
LoadAll
1. Access the USB MEMORY screen (p. 28).
2. Select "LoadAll" and then press the [ENTER] button.