Routine Maintenance - CombiSteel 7489 Serie Mode D'emploi

The information contained in this chapter is aimed at the Use (non-specialised person) and at the Ordinary
Maintenance Staff.
15.1. ELEMENTARY SAFETY REGULATIONS
PROHIBITION OF REMOVAL SAFETY DEVICES
The removal of safety protection is absolutely forbidden for the carrying out of ordinary maintenance work. The
Manufacturer decline any responsibility for any accident caused by the lack of respect for the above written
regulation
INDICATION ON EMERGENCY OPERTAIONS IN CASE OF FIRE

Remove the plug from the socket or switch off at the mains;

Do not use water jets;

Use powder or foam extinguishers.
CLEANING OF THE EXTERNAL PARTS
The following are indicated for this purpose;

Cleaning products: water and neutral non-abrasive detergents (DO NOT USE SOLVENTS);

Cleaning methods: wash with a cloth or a sponge;

Frequency: weekly
CLEANING OF THE CONDENSER
The efficiency of the condenser unit is compromised by the blocking of the condenser which makes it necessary
to clean in weekly. Before carrying out this operation, switch off the appliance, remove the power cable and
proceed as follows:

With the use of an air jet or dry brush with rigid bristles, eliminate, with a vertical movement (as shown
in Fig. 6), the dust and down from the wings.
In the case of oily deposits, use a brush soaked in spirit or similar product. When the operation is finished, start
the appliance up in the normal way.
Figure 6: Cleaning of the Condenser
PERIODIC CHECKS TO BE CARRIED OUT
It is necessary to check periodically that the electric cables and the electric parts are undamaged.

15 ROUTINE MAINTENANCE

Alchol
22