Electrical Diagram; Maintenance And Cleaning; Daily Maintenance And Cleaning; Weekly Maintenance And Cleaning - CombiSteel 7478,0515 Mode D'emploi

11. ELECTRIC DIAGRAM
12. MAINTANCE AND CLEANING
Implement the following periodical maintenance so that the product should work in safe and long life
DAILY MAINTANCE AND CLEANING
Device must be cleaned every day after use, after being sure that it is completely cooled down.
Cleaning must be made by a clean wet cloth by wiping the device. It is recommended that stainless steel surfaces should be wiped by
inox cleaners.
WEEKLY MAINTANCE AND CLEANING
During cleaning, do not use sharp edged, cutting and drilling tools such as scraper, emery in no way.
Cleaning must not be done by spraying the water onto the device in no way.
17/36