General Information - CombiSteel 7489 Serie Mode D'emploi

MANUFACTURER
As the company boasts considerable experience in the field of industrial refrigeration. The technological know-
how acquired, created during years of research and close contact with the production and marketing at an
international level, represent the best guarantee that the manufacturer can offer.
This equipment has been studied inside, externally and in its components, according to the requirements
specified by your market. Furthermore every aspect has been checked for functioning and for appearance before
being dispatched, as shown documentation.
To guarantee the long life of this product, use it according to the suggestions made in this manual.
SERVICE CENTRES
(Sales, Service, Spare parts and Commercial Representation)
For any requirement pertaining to use, maintenance or the request for spare parts, the Costumer should use an
authorized Service Centre (directly care of the manufacturer), specifying the identification details of the
equipment shown on the plaques.
CERTIFICATION
The Condensed air Refrigerator Cupboards and Tables and Refrigerator Units are produces in accordance with
the European Community Regulations applicable at this time of its appearance on the market.
Because the refrigerator cupboard and the table do not come into the ENCLOSED IV of the REGULATION
98/37/CEE, the manufacturer provides self-certification with the CE marking.
GUARANTEE
The new equipment is covered by a guarantee.
The GUARANTEE CERTIFICATE is included with this booklet inside every product. If this booklet is not present
you can ask your supplier for it, specifying:

The serial number (stamped on the relevant plaque, see paragraph 4.6).

The date of purchase.
PREAERRANGEMENTS OF CUSTOMER'S RESPONSIBILITY
It is the Customer's responsibility to carry out everything specified in the documentation. Unless different prior
arrangements have been made, the following are usually the Customer's responsibility.

Predisposition of the area, including any building work and or canalization required.

Electric power supply in accordance with the power regulations in the country of use.

Cleaning materials.
STRUCTURE OF THE MANUAL
The Customer must read the information contained in this Manual very carefully, because the correct
predisposition, installation and use are the basis of the Customer-Manufacturer agreement.
1.1 AIMS AND CONTENTS
This Manual aims to provide the customer with all the information necessary for not only adequate use of the
equipment, but also for the safest and most autonomous use possible. It contains information regarding
Technical Aspects, Operation, Stopping, Maintenance, Spare Parts and Safety.
Before carrying out any operation on the equipment, the User and the Qualified Technicians must carefully read
the instructions, call the Retailer for clarification.

1 GENERAL INFORMATION

9