GRAUPNER mx-10 Hott Manuel De Programmation page 133

Graupner HoTT RPM magnet sensor
Order No. 33616
Graupner HoTT RPM optical sensor
Order No. 33615
Graupner HoTT Smart-Box
Order No. 33700
A vast range of different functions combined in a single device: that's
what destines the SMART-BOX to be your intelligent companion in
future. Whether you want to display telemetry data in real time, or
enter changes to your HoTT system, the large-area screen with 8 x 21
characters makes the task simple. The fl exible Smart-Box includes an
integral buzzer for generating audible signals and warnings for even
greater fl exibility and practicality.
The installation set supplied makes it easy to mount the unit on the
support bars of hand-held transmitters, allowing you to position it in
such a way that you can read off telemetry data in real time while you
control your model.
The user-update facility ensures that the SMART-BOX is always up-to-
date, and provides a route for expanded functions in future.
• Transmitter voltage display with • Country setting
user-variable warning threshold
• Range check • Signal quality
• Receiver temperature • Receiver voltage
• Servo reverse • Servo neutral position
• Servo travel • Cycle time
• Channel swap • Fail-Safe settings
• Mixer settings • Servo test
Dimensions: approx. 76 mm x 72 mm x 17 mm (L x W x H)
Weight: approx. 55g
Graupner HoTT USB Interface cable
Order No. 7168.6
This USB interface cable is used with the separately available adapter
cable No. 7168.6A for updating receivers and sensors.
Graupner HoTT adapter cable USB interface/JR
Order No. 7168.6A
This adapter cable is used with the separately available USB interface
cable cable No. 7168.6 for updating receivers and sensors.
Appendix 133