GRAUPNER mx-10 Hott Manuel De Programmation page 130

the Teacher and Pupil, as this could reduce the effective
range. Please note also that the wireless Trainer function
exploits the downlink connection, and for this reason no
telemetry data are transmitted from the model in this
mode.
If it should occur that the link between the Teacher and
Pupil transmitters is lost during Trainer mode operations,
note that the Teacher transmitter automatically assumes
control of the model.
In this situation, if the Trainer change-over switch is in
the "Pupil" position, then the central LED on the mx-10
HoTT Teacher transmitter starts to fl ash 4-times orange
and emits a audible warning signal. I
In either situation your fi rst recourse should be to reduce
the distance between the two transmitters. If this does
not help, land the model immediately, and seek the
cause.
Checking the system
Possible errors:
• Pupil transmitter not ready
• Teacher transmitter and HoTT receiver in trainer
model not correctly "bound".
130 Program description: Trainer system