Operating Instructions R8/17SF to R120/11SF and R8/17SF+ to R120/11SF+
Thank you for purchasing a BECKER sunshade/awning drive with integrated radio control receiver.
The R8/17SF to R120/11SF tubular drives are high quality products with a broad range of features:
• Optimised for use with sunshades and awnings (use types R8/17RF to R40/17RF or R8/17RF+ to R20/
17RF+ for roller shutters)
• Suitable for awnings and conservatory sunshades. Types SF+ are specially designed for box awnings.
• No settings on the drive
• No external limit switches
• Compensation for alterations to the fabric (temperature, ageing, moisture)
• Optimum adaptation of tensile load to the mechanical requirements of the sunshade system
• Minimal load on the fabric and seams
• Automatic detection of the end position
• Drop distance is set by simply pressing a button on the programming handset or directly above the trans-
mitter
• Designed for left or right installation
• Compatible with BECKER Control WindModul
• Sunshades/awnings radio-controlled individually
• No wiring to the switch or to a relay control
• All drives and transmitters can be combined to suit requirements
• End limits can be programmed and cancelled by radio control
• "TouchControl" transmitter with elegant wall holder in switch design
• "Complex Code" radio control system with code length variable up to 40 bit, enabling more than
1 trillion different codes
• Aerial in connection cable prevents incorrect installation
• Transmitter can simply be copied for selective switching or as a backup copy
Please adhere to these instructions when installing and setting up the system.
BECKER-Antriebe GmbH will be released from all warranty and product liability obligations if the customer modifies the equip-
ment without prior approval from BECKER-Antriebe GmbH or if the equipment is installed incorrectly and/or contrary to the
specified installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and official regulations governing manufacture and advice to
customers, especially the EMC regulations.
This product is subject to technical developments and improvements. Please refer to the current sales brochure for the precise
product specifications.
Despite extensive tests, BECKER-Antriebe GmbH cannot guarantee function of the drives in combination with controls of other
manufacturers. Please consult BECKER-Antriebe GmbH before installation; we will be pleased to assist you.
Introduction
Warranty
E
N
G
L
I
S
H
15