Ec Conformity Declaration - Burkert PTB 01 ATEX 2194 X Mode D'emploi

EC CONFORMITY DECLARATION

We hereby declare that the products with the designation
Devices with II 2G EEx i approval PTB 01 ATEX 2194 X
satisfy the requirements which are specifi ed in the Council Direc-
tives to approximate the laws of the member states:
• Low Voltage Directive (LVD) (2006/95/EC)
• Electromagnetic compatibility (Directive 89/336 EEC)
• ATEX Directive (94/9/EC)
The following standards were used to assess the products concer-
ning compliance with the Low Voltage Directive (2006/95/EC):
EN 50178:1997 Electronic equipment for use in power
installations
EN 60730-1: 2000/ Automatic electrical controls for household
A16:2007 and similar use - Part 1: General require-
ments
EN 60730-2- Automatic electrical controls for household
8:2002/A1:2003 and similar use – Part 2-8: Particular re-
quirements for electrically operated water
valves, including mechanical requirements
EN 60664-1:2003 Insulation coordination for equipment within
low-voltage systems - Part 1: Principles,
requirements and tests
EN 60204-1:2006 Safety of machinery - Electrical equipment
of machines – Part 1: General require-
ments
01 ATEX 2194 X
EN 60529:1991 Degrees of protection provided by enclo-
/A1: 2000 sures (IP code)
Additional requirements for solenoid valves:
DIN VDE Electromagnetic devices and components
0580:2000 - General specifi cations
The following standards were used to assess the products concer-
ning the Directive on Electromagnetic Compatibility (89/336/
EEC):
EN 61000-3-2: Electromagnetic compatibility (EMC) - Part
2006 3-2: Limits - Limits for harmonic current
emissions (equipment input current <= 16
A per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC) - Part
1995/A2:2005 3-3: Limits - Limitation of voltage changes,
voltage fl uctuations and fl icker in public
low-voltage supply systems, for equipment
with rated current <=16 A per phase and
not subject to conditional connection
EN 61000-6-2: Electromagnetic compatibility (EMC) - Part
2005 6-2: Generic standards - Immunity for in-
dustrial environments
EN 61000-6-4: Electromagnetic compatibility (EMC) - Part
2007 6-4: Generic standards - Emission stan-
dard for industrial environments
- 5 -
english