Mounting The Sensor Cradle - KaVo Dental GXS-700 Manuel D'utilisateur

KaVo GXS-700
TM
6. Using GxPicture, ensure that the status icon indicates the ready state
(green icon) which verifies that the sensor is recognized (see "Status Icon"
on page 1).
7. From the GXS-700 GxPicture dialog box, select the "Image Setting" tab and
select the desired settings.
8. Close the installation by taking phantom images using the GXS-700 sensor
(see "Image Quality Assurance" on page 7).

Mounting the Sensor Cradle

Install the sensor cradle in a place that is convenient and does not exceed the
maximum length of the USB cable, which is 10 ft. (3 m). The sensor cradle should
also be positioned so that the cable from the sensor does not create a tripping
hazard. To install the sensor cradle, clean the mounting surface, remove the backing
from the double sided-tape, then firmly press the sensor cradle against the mounting
surface.
4-2 English