Multiple Gxs-700 Sensors - KaVo Dental GXS-700 Manuel D'utilisateur

Multiple GXS-700 Sensors

Multiple GXS-700 sensors are supported on a single PC (and GxPicture
installation).
In the event of multiple sensor installation, after each sensor is
Important:
connected, the user is responsible to verify that it is recognized and
communicating with the PC.
To do so,
right click on the Status Icon (as above)
•
select the information dialog
•
confirm that the newly installed sensor is available to be selected
•
according to its serial number on the Sensor drop-down list.
If the newly connected sensor does not appear on the list, make sure the USB port
that the sensor is plugged into is connected to the PC on which the installation of
GxPicture is running (and is not, for example, on a USB hub which is connected to
a different PC). If the sensor is connected to the correct PC but does not appear on
the Sensor drop-down list, contact Technical Support for further assistance.
Operators of DEXIS or Dentrix software should consult the appropriate software
user manual for the procedure that verifies the presence of a connected sensor. If
required, contact Technical Support (contact info provided in that manual).
English
GxPicture Software
5-3