KaVo Dental GXS-700 Manuel D'utilisateur page 33

The sensor may alternatively be positioned by hand and held in place by the
patient with one finger just like conventional X-ray film. If the positioning device
is not used, a wad of cotton wool may be useful for aligning the sensor parallel
to the tooth. It may be best to position the sensor by hand in the small mouths
of children. Note however, that image quality might be inferior with respect to
one attained using an aiming device.
CAUTION
Biting down on the sensor or cable will damage the housing and/or
cable and lead to a sensor malfunction.
7. Position the X-ray generator as usual for X-ray film.
Use of the parallel technique is highly recommended, with a rectangular cone if
possible.
CORRECT
Important:
CAUTION
For maximum image quality, make sure the patient remains still
during the exposure.
English
Verify connectivity of the GXS-700.
USB PORT
INCORRECT
Use
6-3