Portability; Hygiene - KaVo Dental GXS-700 Manuel D'utilisateur

KaVo GXS-700
TM
WARNING
Take the necessary steps to protect yourself from radiation. For
proper operator positioning, refer to the 'Instructions for Use' of your
intraoral X-ray equipment.
8. Acquire the image by pressing the X-ray button on your radiography
system.
Important:
9. Carefully remove the sensor from the oral cavity following the exposure.
10. Grasp the sensor and positioning device and remove the sensor from under
the retaining clips.
11. If needed, grasp the USB connector and pull it straight out of the port on the
computer.

Portability

GXS-700 can be easily moved from one dental chair to another. Once disconnected
from the USB port of the computer, the sensor may be positioned near a second
dental chair and connected to a USB port present nearby.
The USB technology allows easy connection and disconnection of GXS-700 even if
the computer is switched on, unless the PC presents particular limitations. No
activation or deactivation procedure is necessary with GXS-700, just plug in and out.

Hygiene

CAUTION
After each patient, the sheath must be removed and the sensor must
be cleaned and disinfected by rubbing with isopropyl alcohol (70%);
h olders should be disinfected in an autoclave or with a cleaning agent
after each patient.
6-4
It is important that the X-ray beam hits the whole sensor
surface.
English