Ventilation System - shark VARIAL RS Sécurité Et Instructions D'utilisation

VENTILATION SYSTEM

The ventilation system of the helmet (Fig.
24) consists of:
UPPER AIR INTAKES:
the two openings located under the peak
capture and channel the air, directing it
dispersion-free in the upper area of the
rider's head.
FRONT AIR INTAKES:
also with the contribution of the side
conveyors, two openings located under
the peak capture and channel the air,
directing it dispersion-free in the front
area of the rider's head. Another two
openings are in the front area, near the
sealing edge of the window opening.
CHIN GUARD AIR INTAKE:
provides ventilation in the mouth area
while filtering its content.
AIR EXTRACTORS:
located on the upper rear part of the
helmet, in line with the rear base edge and
on the sides of the helmet so that warm
and stale air can flow out, thus ensuring
optimum comfort inside the helmet.
Fig. 24
15