shark VARIAL RS Sécurité Et Instructions D'utilisation page 6

REMOVABLE INNER
COMFORT PADDING
The removable comfort padding consists
of a liner, pads of the side cheek pads
(right and left) and covering straps, all
completely removable and washable.
The cheek pads are also characterised by
removable inner expanding foam padding.
5. CHEEK PAD DISASSEMBLY
5.1. Unfasten the chin strap (see
instructions).
5.2. Gently pull the red strap in the front
area of the pad of the left cheek pad to
release the safety lever on its back (Fig. 4).
Fig. 4
5.3. Hold the front part of the pad of the
left cheek pad and turn it upwards to
un- hook the front and upper hooks on
its back (Fig. 5).
Fig. 5
5.4. Pull the back of the pad of the left
cheek pad towards the inside of the
helmet to undo the snap fastener on its
back (Fig. 6).
6
Fig. 6
5.5. Pull brackets "A" and "B" of the pad
of the left cheek pad upwards to unhook
them from the corresponding plates
between the outer shell and polystyrene
cheek pad (Fig. 7).
A
Fig. 7
5.6. Completely remove the pad of the left
cheek pad from the helmet.
5.7. Repeat these steps with the right
cheek pad.
Note: Do not remove the polystyrene
cheek pads from the helmet shell.
B