Setting Cal Due Options
(1)
Press the q button to enter setup.
Press the or button to enable/disable this option.
(2)
(3)
Press the q button to confirm.
(4)
After confirmation the device prompts the user to enter the number of days for the reminder.
Change number of days by pressing the or button.
(5)
(6)
Press the q button to go to the next menu.
Setting Last Cal Date
(1)
Press the q button to enable/disable this option.
Press the button to go to the next page.
(2)
(3)
Press the button to go to the previous page.
Setting Calibration Password
(1)
Press the q button to enable/disable this option.
(2)
Press the button to go to the next page.
Press the button to go to the previous page.
(3)
Back To Main Menu
(1)
Press the q button to go to Device Setup Menu
The Cal Options screen displays
Press the button to go to the next (Alarm options) or the button to exit the Setup menu.
(2)
Alarm Setup
ALARM OPTIONS
The Alarm Options Menu allows the user to:
-
enable/disable the vibrating alarm
-
enable/disable the audible alarm (horn)
-
enable/disable the Alarm LEDs
-
enable/disable the MOTIONALERT SELECTION page.
If disabled, the user cannot change the device MotionAlert setting.
-
set Sensor Alarms.
Press
-
the button go to next page
the button to go previous page
the q button to enter setup.
Setting Vibrating Alarm
Press the q button to enable/disable this option.
Setting Horn Alarm
Press q button to enable/disable this option.
Setting LED Alarm
Press q button to enable/disable this option.
ALTAIR 5X/ALTAIR 5X IR
Operation
US
33