On-Screen Indicators - MSA ALTAIR 5X Manuel D'utilisation

Icon Alarm
Operating
Beep
2.4

On-Screen Indicators

Monochrome Display
1
2
3
Fig. 2 Monochrome Display
1 Gas type
2 Current time
3 "Soft Key" 
4 Gas reading
On a monochrome display, a message appears every 30 seconds if the Vibration, Horn or LED alarms
are turned OFF.
This operating beep activates every 30 seconds by momentarily beeping the horn
and flashing the alarm LEDs under the following conditions:
-
Operating beep is enabled
-
Device is on normal Measure Gases page
-
Device is not in battery warning
-
Device is not in gas alarm.
The Operating Beep can be disabled using the SETUP - INSTRUMENT OPTIONS
(→ chapter 3.5) or through MSA Link software.
5
6
Indicator 7
8
ALTAIR 5X/ALTAIR 5X IR
Battery condition
Successful Bump Test/Calibration Indicator
"Soft Key"  indicator
MotionAlert (+ = ON)
Sensor Life Indicator
Bluetooth On/Off
Description
4
5
6
7
US
14